Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Antenna Module, Coaxial Lead & Electrical Lead

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the 2 antenna modules to the antenna ground plate with the retaining screws.
Tighten: Tighten the screws to 1.8 N.m (16 lb in).

Fig 2: View Of Antenna Module Coaxial Lead & Electrical Lead

Courtesy of GENERAL MOTORS CORP.

Position the ground plate to the rear compartment lid and connect the electrical lead to the ground plate.

Fig 3: View Of Antenna Ground Plate & Bolts

Courtesy of GENERAL MOTORS CORP.

Install 15 retaining bolts to the antenna ground plate.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
Install the rear compartment lid trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
Close the rear compartment lid.