LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Acadia SLE, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Negative Battery Cable Ground Bolt
    GM1860989Courtesy of GENERAL MOTORS CORP.
  1. Position the negative battery cable to the battery box. (battery shown removed for clarity).
    NOTE: Refer to Fastener Notice .
  2. Install the negative battery cable ground bolt (2).

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Identifying Body Wiring Harness Electrical Connector And Negative Battery Cable Electrical Connector
    GM1860988Courtesy of GENERAL MOTORS CORP.
  3. Connect the body wiring harness electrical connector (4) to the negative battery cable electrical connector (1).
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals