LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2007 >> Acadia SLE, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Extension Cable Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Negative Cable Extension Cable
    GM1861215Courtesy of GENERAL MOTORS CORP.
  1. Install the battery negative cable extension cable to the engine compartment.
    NOTE: Refer to Fastener Notice .
    Fig 2: Identifying Battery Negative Cable Extension Cable Ground Bolt And Battery Negative Cable Extension Cable Clip
    GM1861213Courtesy of GENERAL MOTORS CORP.
  2. Install the battery negative cable extension cable ground bolt (1) to the left wheelhouse panel upper reinforcement.

    Tighten:  Tighten the bolt to 58 N.m (43 lb ft).

  3. Install the battery negative cable extension cable clip (3) to the left upper engine compartment support bracket.
  4. Install the battery negative cable extension cable clip (4) to the front compartment side rail.
    5. Fig 3: View Of Battery Negative Cable Extension Cable Ground Bolt And Battery Negative Cable Extension Cable Terminal
    GM1861212Courtesy of GENERAL MOTORS CORP.
  5. Position the battery negative cable extension cable terminal (1) to the cylinder head.
  6. Install the battery negative cable extension cable ground bolt (2) to the cylinder head.

    Tighten:  Tighten the bolt to 58 N.m (43 lb ft).

    7. Fig 4: Identifying Battery Negative Cable Extension Cable Clip
    GM1861211Courtesy of GENERAL MOTORS CORP.
  7. Install the engine wiring harness to the battery negative cable extension cable clip (2).
  8. Install the air cleaner assembly. Refer to AIR CLEANER ASSEMBLY REPLACEMENT .
  9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals