LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Charging System And Starting System - Introduction >> Repair Instructions >> Starter Shield Replacement >> Installation Procedure

Installation Procedure

  1. If equipped with a 8.1L engine, install the starter heat shield.
    Fig 1: View of Starter Heat Shield, Bolts, & Nuts
    GM747162Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the starter heat shield bolts, and nut.

    Tighten: 

    • Tighten the bolts to 3 N.m (35 lb in).
    • Tighten the nut to 5 N.m (44 lb in).

  3. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
    Fig 2: View Of Starter & Heat Shield
    GM663472Courtesy of GENERAL MOTORS CORP.
  4. Install the starter motor. Refer to Starter Motor Replacement (4.3L Engine)  or Starter Motor Replacement (4.8L, 5.3L, and 6.0L Engines)  or Starter Motor Replacement (8.1L Engine)  or Starter Motor Replacement (6.6L (LLY) Engine) .
scientia non olet · About LEMON Manuals