Installation Procedure

Position the center bottom of the mirror mount against the windshield at the top of the support button (1).

Fig 1: View Of Rearview Mirror Mounting Components
Courtesy of GENERAL MOTORS CORP.
Slide the base of the mirror onto the button.

NOTE: Refer to FASTENER NOTICE .

Make sure the mirror is firmly seated on the windshield button by pushing down on the base of the mirror.
Tighten: Tighten the screw (3) to 1.8 N.m (16 lb in) in order to secure the mirror base to the button.
Install the base trim cover.
Connect the electrical connector.

Fig 2: Connecting Rearview Mirror Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Install the wire cover.
Reposition the mirror assembly.