LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Power Takeoff >> Power Take-Off System >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the PTO switch to the housing
    Fig 1: Installing PTO Switch Into I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
  4. Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals