LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System - Introduction >> Repair Instructions >> Generator Battery Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the engine harness electrical connector from the generator battery control module.
    Fig 1: Disconnecting Engine Harness Electrical Connector From Generator Battery Control Module
    GM1484797Courtesy of GENERAL MOTORS CORP.
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (4.3L Engine) .
  3. Cut the tie straps and electrical tape attaching the generator battery control module to the battery cable.
  4. Squeeze the negative battery cable branches together.
    5. IMPORTANT: Note the orientation of the generator battery control module prior to removal.
  5. Slide the generator battery control module off of the negative battery cable.
scientia non olet · About LEMON Manuals