LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Windshield Replacement >> Installation Procedure

Installation Procedure

  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Install the window side reveal moldings to the vehicle.
    Fig 1: Installing Reveal Molding
    GM398501Courtesy of GENERAL MOTORS CORP.
    3. NOTE: Refer to FASTENER NOTICE .
    Fig 2: Installing Window Side Reveal Molding Screws
    GM398502Courtesy of GENERAL MOTORS CORP.
  3. Install the screws to the left and the right sides of the window side reveal moldings.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  4. Install the front door sealing weatherstrips (1) to the retainer (2).
    Fig 3: View Of Front Door Sealing Weatherstrip
    GM441415Courtesy of GENERAL MOTORS CORP.
  5. Install the cowl air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  6. Install the window wiper arms. Refer to Wiper Arm Replacement .
  7. Install the antenna mast, if equipped. Refer to Fixed Antenna Replacement .
  8. Install the rearview mirror. Refer to Rearview Mirror Replacement .
  9. Close the hood.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals