LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

  1. Slide the BCM onto the bracket.
  2. Connect all the connectors (1) except the brown connector.
    Fig 1: Harness Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  3. Connect the brown connector.
  4. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    Fig 2: Knee Bolster & Bolts
    GM348714Courtesy of GENERAL MOTORS CORP.
  5. Connect the negative battery cables.
  6. Reprogram the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  7. Perform the Passlock Learn Procedure. Refer to Programming Theft Deterrent System Components in Theft Deterrent.
scientia non olet · About LEMON Manuals