LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 2500 HD, 2D Pickup, 6.6 2, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Introduction) >> Repair Instructions >> Glow Plug Replacement - Bank 1 >> Installation Procedure

Installation Procedure

    Fig 1: View Of Left Glow Plugs
    GM1335554Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the glow plug(s).

    Tighten:  Tighten the plug to 18 N.m (13 lb ft).

  2. Install the harness to the glow plug(s).
  3. Install the glow plug harness nut(s).

    Tighten:  Tighten the nut to 1.7 N.m (15 lb in).

  4. Install the left wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) or Battery Negative Cable Disconnect/Connect Procedure (Auxiliary Battery) in Engine Electrical.
scientia non olet · About LEMON Manuals