LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 2500 HD, 2D Pickup, 6.6 2, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Introduction) >> Repair Instructions >> Fuel Feed Pipe Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Cooling Hoses, Eye Bolts & Washers
    GM1334883Courtesy of GENERAL MOTORS CORP.
  1. Remove the water outlet tube. Refer to Water Outlet Tube Replacement (6.6L (LLY) Engine) in Engine Cooling.
  2. Disconnect the fuel feed line quick connect fitting. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
  3. Remove the fuel injection control module upper banjo bolt and washer.
    4. Fig 2: View Of Exhaust Gas Recirculation (EGR) Coolant Pipe, Hose & Bolts
    GM1335419Courtesy of GENERAL MOTORS CORP.
  4. Reposition the exhaust gas recirculation (EGR) coolant pipe hose clamp.
  5. Remove the EGR coolant pipe hose.
  6. Remove the EGR coolant pipe bolts.
  7. Remove the EGR coolant pipe.
    8. Fig 3: View Of Fuel Feed Pipe & Bolts
    GM1335584Courtesy of GENERAL MOTORS CORP.
  8. Remove the fuel feed pipe nut and clip bolts.
  9. Remove the fuel feed pipe.
scientia non olet · About LEMON Manuals