LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 2500 HD, 2D Pickup, 6.6 2, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Introduction) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Camshaft Position Sensor
    GM1334865Courtesy of GENERAL MOTORS CORP.
  1. Remove the cooling fan pulley. Refer to Cooling Fan Pulley Replacement (6.6L (LLY) Engine) in Engine Cooling.
  2. Remove the camshaft position (CMP) sensor bolt.
  3. Remove the CMP sensor.
scientia non olet · About LEMON Manuals