LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 2500 HD, 2D Pickup, 6.6 2, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Introduction) >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

    Fig 1: MAF/IAT Sensor Electrical Connector
    GM877698Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).
    2. Fig 2: Air Cleaner Cover, Screws & Element
    GM858229Courtesy of GENERAL MOTORS CORP.
  2. Loosen the screws holding the air cleaner housing halves together.
  3. Separate the housing halves and remove the air filter element.
scientia non olet · About LEMON Manuals