LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Radiator Hose Outlet - Starter/Generator Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View OF SGCM, Radiator Outlet Hose & Clamp
    GM1206682Courtesy of GENERAL MOTORS CORP.
  1. Install the SGCM radiator outlet hose (1) to the vehicle.
  2. Install the SGCM radiator outlet hose (1) to the SGCM (3).
  3. Position the SGCM radiator outlet hose clamp (2) to the SGCM (3).
  4. Install the SGCM radiator outlet hose to the clip.
    5. Fig 2: View Of Coolant Pump Inlet Hose, Clamp & Pump
    GM1206695Courtesy of GENERAL MOTORS CORP.
  5. Install the SGCM radiator outlet hose to the clip (3).
    6. Fig 3: View Of SGCM Radiator Outlet Hose & SGCM Radiator
    GM1206689Courtesy of GENERAL MOTORS CORP.
  6. Install the SGCM radiator outlet hose (5) to the clip (4).
  7. Install the SGCM radiator outlet hose (5) to the SGCM radiator (2). Refer to Coolant Pipe Quick Connect Fitting - Starter/Generator Control Module .
    8. NOTE: The procedure below must be followed. Improper coolant level could result in a low or high coolant level condition, causing starter/generator control module damage.
  8. Fill the SGCM cooling system. Refer to Draining and Filling Cooling System (w/RPO HP2)  or Draining and Filling Cooling System (w/o RPO HP2) .
scientia non olet · About LEMON Manuals