LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Tank Hose - Starter/Generator Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of SGCM, Coolant Tank, Hose & Clamp
    GM1206680Courtesy of GENERAL MOTORS CORP.
  1. Install the SGCM coolant tank hose (1) to the SGCM (5).
  2. Position the SGCM coolant tank hose clamp (4) to the SGCM (5).
  3. Install the SGCM coolant tank hose (1) to the SGCM coolant tank (3).
  4. Position the SGCM coolant tank hose clamp (2) to the SGCM coolant tank (3).
    5. NOTE: The procedure below must be followed. Improper coolant level could result in a low or high coolant level condition, causing starter/generator control module damage.
  5. Top off the SGCM cooling system. Refer to Draining and Filling Cooling System - Starter/Generator Control Module .
scientia non olet · About LEMON Manuals