LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Pipe Quick Connect Fitting - Starter/Generator Control Module >> Removal Procedure

Removal Procedure

    Fig 1: Hooking Retaining Ring
    GM82144Courtesy of GENERAL MOTORS CORP.
  1. Using a bent-tip screwdriver or equivalent, pull on one of the open ends of the retaining ring in order to rotate the retaining ring.
  2. Rotate the retaining ring around the quick connector until the retaining ring is out of position and can be completely removed.
  3. Remove the starter/generator control module (SGCM) radiator hose from the SGCM radiator.
scientia non olet · About LEMON Manuals