ECM Replacement

If the engine control module (ECM) is replaced, the following procedures must be performed:

• The ECM Reprogramming-Refer to Service Programming System (SPS)  .
• The Turbocharger Learn Procedure-Refer to Turbocharger Learn Procedure .
• Theft Deterrent-Refer to Programming Theft Deterrent System Components .
• Engine Oil Life Remaining-When available, use a scan tool to reset the Engine Oil Life Remaining back to the original percentage recorded before the module was reprogrammed.
• Transmission Fluid Life Remaining-When available, use a scan tool to reset the Transmission Fluid Life Remaining back to the original percentage recorded before the module was reprogrammed.