LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement - Bench >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Mounting
    GM298924Courtesy of GENERAL MOTORS CORP.
  1. Guide the seat belts through the slots in the seat. Install the seat to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the seat mounting bolts.

    Tighten:  Tighten the seat mounting bolts to 70 N.m (52 lb ft).

  3. Install the seat mounting nuts.

    Tighten:  Tighten the seat mounting nuts to 45 N.m (33 lb ft).

  4. Connect the electrical connectors, if equipped.
  5. Install the seat adjuster trim covers. Refer to Seat Adjuster Track Cover Replacement - Front (Power)  or Seat Adjuster Track Cover Replacement - Front (Manual) .
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals