Scan Tool Data List
Body Control Module (BCM)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON with engine OFF | |||
| Battery Voltage | Data | Volts | 12.5 |
| RAP Timer | Data | Seconds | 1198 Seconds |
| Driver Door Jamb Sw. | Input 1 | Active/Inactive | Inactive |
| Ignition 1 | Input 1 | Active/Inactive | Active |
| Ignition 3 | Input 1 | Active/Inactive | Active |
| Ignition Power Mode | Input 1 | Off/Unknown/Run/Crank | Run |
| Key in Ignition | Input 1 | Yes/No | Yes |
| Liftglass/Rear Gate | Input 1 | Closed/Open | Closed |
| Psgr. Door Jamb/Door Handle Switches | Input 1 | Active/Inactive | Inactive |
| RAP Relay Feedback | Input 1 | On/Off | Off |
| Rear Door Ajar | Input 1 | Active/Inactive | Inactive |
| RAP Relay | Outputs | On/Off | Off |
| Manufacturers Enable Counter | Module Information 1 | 0-255 | 0 |
| Software Design Suffix | Module Information 1 | Two Letters | Varies |
| Software Part Number | Module Information 1 | Numeric | Varies |
| RAP Calibration Number | Module Information 2 | Numeric | Varies |
| RAP Suffix | Module Information 2 | Two Letters | Varies |
| Module Part Number | Module Information 3 | Numeric | Varies |