LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Jimmy Part Time, Automatic >> Repair and Diagnosis (Single Page) >> Transmission >> Transfer Case >> Transfer Case - NVG 233-NP1 >> Repair Instructions >> Transfer Case Motor/Encoder Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Transfer Case Shield
    GM707039Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transfer case shield. Refer to Transfer Case Shield Replacement .
  3. Remove the front propeller shaft. Refer to Propeller Shaft Replacement - Front in Propeller Shaft.
    4. Fig 2: View Of Motor/Encoder Electrical Connector
    GM662851Courtesy of GENERAL MOTORS CORP.
  4. Remove the motor/encoder electrical connector.
    5. Fig 3: Identifying Actuator Encoder Motor Mounting Bolts
    GM662850Courtesy of GENERAL MOTORS CORP.
  5. Remove the motor/encoder mounting bolts.
  6. Remove the motor/encoder assembly.
  7. Remove the motor/encoder gasket.
scientia non olet · About LEMON Manuals