Scan Tool Data Definitions
- 8 Digit GM Part Number
-
The scan tool displays an 8 digit alphanumeric number. The part number of the module.
- Balance
-
The scan tool displays a numeric value. This data parameter refers to the right to left audio output balance with a range from -50 to +50.
- Bass
-
The scan tool displays % (percent). This data parameter refers to the percentage of bass commanded by the radio.
- Battery Voltage
-
The scan tool displays the voltage level of the battery.
- Cal. Module 1 Part No.
-
The scan tool displays the 8 digit part number of the module.
- Cal. Module 1 Suffix
-
The scan tool displays the 2 position suffix of the module.
- Chime Volume
-
The scan tool displays 0-100%. The percentage at which the chime volume has been calibrated to.
- Fade
-
The scan tool displays a numeric value. This data parameter refers to the front to back audio output fade with a range from -50 to +50.
- Ignition Since Current DTC
-
The scan tool displays cycles of the ignition. This data parameter indicates the number of ignition cycles since a current DTC was set.
- Midrange
-
The scan tool displays % (percent). This data parameter refers to the percentage of midrange commanded by the radio.
- Operational S/W Part No.
-
The scan tool displays the 8 digit software part number of the module.
- Operational S/W Suffix
-
The scan tool displays the 2 position software suffix of the module.
- Signal Strength
-
The scan tool displays dB (decibel). This data parameter indicates the strength of the tuned frequency in dB.
- Treble
-
The scan tool displays % (percent). This data parameter refers to the percentage of treble commanded by the radio.
- Volume
-
The scan tool displays % (percent). This data parameter refers to the percentage of volume commanded by the radio.