LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Jimmy Automatic, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Replacement (4.3L) >> Installation Procedure

Installation Procedure

    Fig 1: Locating Negative Battery Cable Bolt At Block
    GM43023Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the negative battery cable bolt to the block.

    Tighten:  Tighten the negative battery cable bolt to 17 N.m (13 lb ft).

  4. Fig 2: Locating Negative Battery Cable Bolt At Radiator Support
    GM712216Courtesy of GENERAL MOTORS CORP.
  5. Install the negative battery cable bolt to the radiator support.

    Tighten:  Tighten the negative battery cable bolt to 9 N.m (80 lb in).

  6. Fig 3: Locating Negative Battery Cable Bolt At Frame
    GM712212Courtesy of GENERAL MOTORS CORP.
  7. Install the negative battery cable bolt to the frame.

    Tighten:  Tighten the negative battery cable bolt to 9 N.m (80 lb in).

  8. Lower the vehicle.
  9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .