Installation Procedure
- Install the air cleaner outlet duct.
- Install the air cleaner outlet duct bolt.
Tighten: Tighten the bolt to 10 N.m (89 lb in).
- Tighten the clamps at the following:
- MAF/IAT sensor
- Throttle body
Tighten: Tighten the clamps to 7 N.m (62 lb in).
- Connect the PCV fresh air tube (2) to the air cleaner resonator outlet duct (1).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.