LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the caps from the fuel feed/return and EVAP pipes.
  2. Install and connect the fuel feed (3) and return (2) pipes to the sending unit and retaining clips.
    3. Fig 1: View Of EVAP Pipe, Fuel Feed & Return
    GM815641Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals