LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Insert the air cleaner element.
  2. Install the air cleaner cover.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    3. Fig 1: Air Cleaner Cover
    GM360820Courtesy of GENERAL MOTORS CORP.
  3. Tighten the air cleaner cover screws until snug.
  4. Install the outlet resonator to the MAT/IAT sensor.
  5. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 4 N.m (35 lb in).

    6. Fig 2: View Of Air Cleaner Outlet Duct Clamp
    GM360851Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals