LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.8L, 5.3L, & 6.0L (Introduction) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the CMP sensor.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the CMP sensor bolt.

    Tighten:  Tighten the bolt to 29 N.m (21 lb ft).

    3. Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals