LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, RWD >> Repair and Diagnosis >> Engine Mechanical >> Power Takeoff >> Power Take-Off System >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
  2. Pull out the switch housing from the I/P.
    3. Fig 1: I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the wire connector to the PTO switch.
  4. Remove the PTO switch from the switch housing.
scientia non olet · About LEMON Manuals