LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 8.1 G, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - 8.1L (Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the sending unit. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel pump electrical connector.
  3. Remove the fuel lever sensor electrical connector retaining clip.
  4. Disconnect the fuel level sensor electrical connector.
  5. Remove the fuel level sensor retaining clip.
  6. Remove the fuel level sensor (1).
    Fig 1: Fuel Level Sensor
    GM1306358Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals