LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 8.1 G, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 8.1L (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Remove the caps from the fuel feed/return, and EVAP lines.
    Fig 1: Fuel Hose/Pipes Assembly
    GM1306291Courtesy of GENERAL MOTORS CORP.
  2. Install and connect the fuel feed (1) line to the sending unit and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Install the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .
scientia non olet · About LEMON Manuals