LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 8.1 G, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 8.1L (Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Remove the intake air resonator. Refer to Intake Air Resonator Replacement .
    Fig 1: View Of MAF/IAT Sensor Electrical Connectors
    GM750582Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector (3).
    3. Fig 2: Air Cleaner Assembly
    GM334911Courtesy of GENERAL MOTORS CORP.
  3. Pull up on the air cleaner assembly (1) in order to release the retainers from the air cleaner adapter (2).
    4. Fig 3: View Of Air Cleaner Assembly, MAF/IAT Sensor & Clamp
    GM858230Courtesy of GENERAL MOTORS CORP.
  4. If necessary, loosen the MAF/IAT sensor clamp.
  5. Remove the MAF/IAT sensor.
scientia non olet · About LEMON Manuals