LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 6.6 1, RWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the air cleaner by pressing downward until the grommets are seated.
    2. Fig 1: Air Cleaner Assembly
    GM360827Courtesy of GENERAL MOTORS CORP.
  2. Connect the MAF/IAT sensor electrical connector (4).
    3. Fig 2: View Of Auxiliary Battery Relay, MAF, IAT & Coolant Level Sensor Electrical Connectors
    GM674702Courtesy of GENERAL MOTORS CORP.
  3. Install the outlet resonator to the MAT/IAT sensor.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.

    Tighten:  Tighten the clamp to 4 N.m (35 lb in).

    5. Fig 3: View Of Air Cleaner Outlet Duct Clamp
    GM360851Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals