LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 6.6 1, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Lb7) (Introduction) >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the CMP sensor.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the CMP sensor bolt.

    Tighten:  Tighten the bolt to 8 N.m (71 lb in).

  3. Install the cooling fan pulley (2). Refer to Cooling Fan Pulley Replacement (6.6L (LB7) Engine) or Cooling Fan Pulley Replacement (6.6L (LLY) Engine) in Engine Cooling.
  4. Connect the CMP sensor electrical connector (1).
    5. Fig 1: View Of CMP Sensor Electrical Connector & Cooling Fan Pulley
    GM742170Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals