LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 6.6 1, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Lb7) (Introduction) >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Install the sending unit and a NEW seal.
    2. Fig 1: Ending Unit And Seal
    GM871951Courtesy of GENERAL MOTORS CORP.
  2. Using J 44402  , install the sending unit lock ring.
    3. Fig 2: Removing/Installing Sending Unit Lock Ring Using J 44402
    GM871947Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel pipes to the sending unit. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Install the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .
scientia non olet · About LEMON Manuals