LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Sierra 2500 HD, 2D Pickup, 6.6 1, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L (Lb7) (Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the fuel level sensor.
  2. Install the sensor retaining clip (3).
  3. Connect the sensor electrical connector (1).
    4. Fig 1: Fuel Level Sensor Electrical Connector, Locking Tangs & Retaining Clip
    GM740113Courtesy of GENERAL MOTORS CORP.
  4. Install the sending unit. Refer to Fuel Sender Assembly Replacement .
scientia non olet · About LEMON Manuals