LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Safari Van Passenger, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel pipe shield (3) from the frame bracket (2) by removing the 2 nuts (4).
    Fig 1: View Of Fuel Pipe Shield Mounting Nuts
    GM556742Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Thoroughly wash all contaminants from around the EHCU (1). The area around the EHCU must be free from loose dirt to prevent contamination of disassembled ABS components.
  2. Disconnect the electrical connectors from the EBCM.
  3. Remove the mounting screws (1) that fasten the EBCM (2) to the BPMV (5).
    Fig 2: Expanded View Of EBCM & BPMV
    GM556746Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not use a tool to pry the EBCM or the BPMV. Excessive force will damage the EBCM.
  4. Remove the EBCM (2) from the BPMV (5). Removal may require a light amount of force.
  5. Clean the BPMV to EBCM mounting surfaces with a clean cloth.
scientia non olet · About LEMON Manuals