LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission Servicing >> Lubrication >> Checking Fluid Levels

Checking Fluid Levels

  1. Raise and suitably support the vehicle. Ensure the vehicle is level. Clean any dirt from around the fill plug. Remove the transmission fill plug. See Fig 1 and Fig 2 .
  2. Ensure transmission fluid level is even with the bottom of the fill plug hole. Add appropriate fluid, if necessary. See RECOMMENDED FLUIDS .
  3. Apply sealant to fill plug threads. Install the transmission fill plug and tighten to specification. See TORQUE SPECIFICATIONS . Lower the vehicle.
Fig 1: Removing & Installing Oil Fill Plug (NV1500)
G00102992Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Oil Fill Plug (NV3500)
G00102990Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals