LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Steering Linkage (Non-Rack & Pinion) >> Repair Instructions >> Steering Linkage Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Steering Linkage Shield
    GM291214Courtesy of GENERAL MOTORS CORP.
  1. Install the steering linkage shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the steering linkage shield bolts and the washers.

    Tighten:  Tighten the steering linkage shield bolts to 32 N.m (24 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals