LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Housing End Plug Replacement - Off Vehicle >> Assembly Procedure

Assembly Procedure

    Fig 1: View Of Steering Gear Housing End Plug Assembly
    GM322010Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the O-ring seal (3) with power steering fluid.
  2. Install the O-ring seal (3) into the steering gear housing (5).
  3. Install the plug (2).
  4. Install the retaining ring (1). Ensure that the retaining ring open end is approximately 25 mm (1 in) from the access hole in the steering gear housing (5).
scientia non olet · About LEMON Manuals