LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (P Series) >> Assembly Procedure

Assembly Procedure

    Fig 1: Locating Pump Housing Assembly Components
    GM447980Courtesy of GENERAL MOTORS CORP.
  1. Install the flow control spring (2) to the pump housing assembly (1).
  2. Install the control valve assembly (3) to the flow control spring (2).
    3. Fig 2: Locating Power Steering Reservoir Components
    GM447978Courtesy of GENERAL MOTORS CORP.
  3. Install the O-ring seal (3) to the connector and fitting assembly (4).
    4. NOTE: Refer toFastener Notice in Cautions and Notices.
  4. Install the connector and fitting assembly (4) to the pump housing (1).

    Tighten:  Tighten the connector and fitting assembly (4) to 75 N.m (55 lb ft).

scientia non olet · About LEMON Manuals