LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pressure Pipe/Hose Replacement >> Removal Procedure

Removal Procedure

NOTE: Refer to Power Steering Hose Disconnected Notice in Cautions and Notices.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the steering linkage shield, if equipped. Refer to Steering Linkage Shield Replacement in Steering Linkage.
  3. Install a drain pan under the vehicle.
    4. Fig 1: View Of Pressure Hose At Power Steering Pump
    GM395856Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the pressure hose from the power steering pump.
  5. Lower the vehicle.
  6. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls 4.3L.
    7. Fig 2: View Of Power Steering Pressure Hose At Power Steering Gear
    GM395770Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the power steering gear pressure hose from the power steering gear.
  8. Remove the power steering gear pressure hose from the vehicle.
scientia non olet · About LEMON Manuals