LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering System >> Repair Instructions >> Steering Gear Thrust Support Replacement - Off Vehicle (700 Gear) >> Disassembly Procedure

Disassembly Procedure

  1. Rotate the stub shaft back and forth in order to drain the power steering fluid.
    2. Fig 1: Removing Coupling Shield Retainer & Lock Nut
    GM509348Courtesy of GENERAL MOTORS CORP.
  2. Remove the coupling shield retainer and the lock nut from the steering gear housing using J 43435  and a torque wrench. See Special Tools and Equipment .
    3. Fig 2: View Of Adjuster Nut Assembly, Steering Gear Housing & J 42882
    GM322012Courtesy of GENERAL MOTORS CORP.
  3. Remove the adjuster nut assembly (2) from the steering gear housing (1) using J 42882  . See Special Tools and Equipment .
    4. Fig 3: Locating Thrust Support Assembly Components
    GM322011Courtesy of GENERAL MOTORS CORP.
  4. Remove the thrust support assembly (2) from the steering gear housing (1).
  5. Remove the O-ring seal (3) from the thrust support assembly (2).
scientia non olet · About LEMON Manuals