LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Fuel Filler Hose Replacement (Pickup) >> Installation Procedure

Installation Procedure

    Fig 1: Locating Fuel Filler Hose Components (Pickup)
    GM616679Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the fuel tank openings.
  2. Install the fuel fill and vent hoses to the fuel tank.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the hose clamps.

    Tighten: 

    • Tighten the vent hose clamp (1) to 1.7 N.m (15 lb in).
    • Tighten the fuel fill hose clamp (5) to 2.5 N.m (22 lb in).

  4. Install the fuel filler pipe. Refer to Filler Tube Replacement (Pickup) , Filler Tube Replacement (2-Door Utility)  or Filler Tube Replacement (4-Door Utility Lower) .
  5. Refill the fuel system.
  6. Install the fuel filler cap.
  7. Connect the negative battery cable.
  8. Inspect for leaks.
scientia non olet · About LEMON Manuals