LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Positive Cable Replacement (4.3L) >> Installation Procedure

Installation Procedure

    Fig 1: Locating Nut Retaining Positive Battery Cable To Starter
    GM43021Courtesy of GENERAL MOTORS CORP.
  1. Install the positive battery cable to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the positive battery cable nut to the engine.

    Tighten:  Tighten the positive battery cable nut to 6 N.m (80 lb in).

  3. Install the nut retaining the positive battery cable to the starter.

    Tighten:  Tighten the positive battery cable nut to 9 N.m (80 lb in).

  4. Lower the vehicle.
    5. Fig 2: Locating Nut Retaining Positive Battery Cable To Generator
    GM713799Courtesy of GENERAL MOTORS CORP.
  5. Install the nut retaining the positive battery cable to the generator.

    Tighten:  Tighten the positive battery cable nut to 17 N.m (13 lb ft).

    6. Fig 3: Locating Bolt Retaining Positive Battery Cable To Underhood Fuse Block
    GM197383Courtesy of GENERAL MOTORS CORP.
  6. Install the nut retaining the positive battery cable to the underhood fuse block.

    Tighten:  Tighten the positive battery cable nut to 10 N.m (89 lb in).

  7. Connect the positive battery cable to the battery.

    Tighten:  Tighten the positive terminal bolt to 14 N.m (11 lb ft).

  8. Connect the negative battery cable to the battery.
scientia non olet · About LEMON Manuals