Installation Procedure
- Install the amplifier to the mounting bracket.
- Install the amplifier mounting nuts.
Tighten: Tighten the amplifier mounting bracket bolts to 10 N.m (88 lb in).
- Install the console wiring harness to the amplifier.
- Install the remote CD changer, if equipped. Refer to Remote CD Player Replacement .
- Install the floor console to the vehicle. Refer to Console Replacement - Front Floor (Full Length (Auto Trans)) , Console Replacement - Front Floor (Full Length (Envoy)) , Console Replacement - Front Floor (Non-Full Length) or Console Replacement - Front Floor (Full-Length (Manual Trans)) .
- Install the negative battery cable.
NOTE:
Refer to Fastener Notice in Cautions and Notices.