LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - NVG 236-NP8 >> Repair Instructions >> Transfer Case Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Transfer Case Shield
    GM707039Courtesy of GENERAL MOTORS CORP.
  1. Install the transfer case shield to the cross member.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the transfer case shield mounting bolts fro the transfer case shield.

    Tighten:  Tighten the mounting bolts to 33 N.m (24 lb ft).

  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
scientia non olet · About LEMON Manuals