LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Case - NVG 236-NP8 >> Repair Instructions >> Transfer Case Adapter Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Transfer Case Adapter, Bolts & Seal
    GM652614Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not reuse the old gasket if it is damaged, replaced it. Do not use any type of sealer in place of the gasket.
  1. Install the new transfer case adapter seal.
  2. Install the transfer adapter.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the transfer case adapter mounting bolts.

    Tighten:  Tighten the transfer case adapter mounting bolts to 550 N.m (40 lb ft).

    4. Fig 2: View Of Transfer Case Gasket
    GM654219Courtesy of GENERAL MOTORS CORP.
  4. Install a new gasket the transfer case gasket.
    5. Fig 3: View Of Transfer Case Assembly
    GM648037Courtesy of GENERAL MOTORS CORP.
  5. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement .
scientia non olet · About LEMON Manuals