HVAC System Torque Specifications
HVAC SYSTEM TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor Mounting Bolt | 37 (50) | |
| Compressor | ||
| Discharge Hose-To-Condenser Fitting | 21 (28) | |
| Suction & Discharge Hose-To-Compressor | 24 (33) | |
| Suction Hose-To-TXV | 35 (48) | |
| Evaporator Tube-To-Condenser Fitting | 21 (28) | |
| Heater | ||
| Inlet & Outlet Hoses Bracket Bolt | 18 (25) | |
| Inlet Hose Fitting At Intake Manifold | 17 (24) | |
| Outlet Hose Bracket Bolt | 18 (25) | |
| INCH. Lbs. (N.m) | ||
| A/C | ||
| Evaporator & Blower Module Shield Screws | 19 (2.2) | |
| Refrigerant Pressure Sensor | 42 (4.8) | |
| Air | ||
| Distributor Duct Mounting Screw | 17 (1.9) | |
| Inlet Assembly Mounting Stud | 40 (4.5) | |
| Outlet Assembly Retaining Screw | 22 (2.5) | |
| Actuator Retaining Screws (All) | 17 (1.9) | |
| Blower Motor | ||
| Fan Assembly Mounting Screw | 17 (1.9) | |
| Relay Bracket Mounting Screw | 17 (1.9) | |
| Resistor Mounting Screw | 17 (1.9) | |
| Compressor Pressure Relief Valve | 80 (9) | |
| Condenser Insulator Retaining Screw | 17 (1.9) | |
| Evaporator Case Section to Blower Case Section Retaining Screw | 17 (1.9) | |
| Floor Air Outlet Mounting Screw | 17 (1.9) | |
| Heater | ||
| Core Access Cover Screw | 40 (4.5) | |
| Outlet Hose Bracket Bolt | 40 (4.5) | |
| Vent Module Mounting Nut/Screw/Stud | 40 (4.5) | |
| HVAC Control Module Retaining Screws | 17 (1.9) | |
| Intermediate Bracket Bolts | 89 (10) | |
| Knee Bolster Bracket Nuts | 49 (5.5) | |
| Receiver Drier Clamp Screw | 89 (10) | |