LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System - 3.5L (Introduction)) >> Repair Instructions >> Fuel Tank Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel filter. Refer to Fuel Filter Replacement .
  2. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to disconnect the following from the fuel tank module (2):
    • The EVAP pipe (5)
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  3. Disconnect the EVAP pipes (3, 5) from the vent valve (4). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Disengage the following from the retaining clips (1):
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  5. Disengage the EVAP pipe (5) from the retaining features molded into the fuel tank.
    6. Fig 1: View Of Fuel Tank Module, Fuel Pipes, & EVAP Pipes
    GM1361716Courtesy of GENERAL MOTORS CORP.
  6. Remove the fuel tank module from the fuel tank. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals