Fuel Tank Draining Procedure
Tools Required:
- J 36850 Transjel Lubricant. See Special Tools and Equipment .
- J 42960-2 Fuel Flapper Door Holder. See Special Tools and Equipment .
- J 45004 Fuel Tank Drain Hose. See Special Tools and Equipment .
CAUTION:
Refer to Gasoline/Gasoline Vapors Caution
in Cautions and Notices.
CAUTION:
Never drain or store fuel in an open container. Always use an approved fuel storage container in order to reduce the chance of fire or explosion.
CAUTION:
Place a dry chemical (Class B) fire extinguisher nearby before performing any on-vehicle service procedures. Failure to follow these precautions may result in personal injury.
- Remove the fuel filler cap.
- Install the J 42960-2 into the fuel fill pipe in order to hold the door open. See Special Tools and Equipment .
- Insert the J 45004 into the fuel tank until the hose reaches the bottom of the fuel tank. See Special Tools and Equipment .
- Use an air operated pump device in order to drain the fuel into an approved gasoline container.
- Simultaneously twist and pull in order to remove the J 45004 from the fuel tank. See Special Tools and Equipment .
IMPORTANT:
Lubricate the fuel drain hose with J 36850
or equivalent to aid in hose insertion and removal. See Special Tools and Equipment . Do not use an unapproved lubricant.