LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, RWD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Chassis >> Removal Procedure

Removal Procedure

CAUTION: Refer to Fuel and EVAP Pipe Caution in Cautions and Notices.
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Cautions and Notices.
NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Cautions and Notices.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to disconnect the following from the chassis bundle (2, 3):
    • The fuel return hose (1)
    • The fuel filter (4)
    4. Fig 1: View Of Fuel Return Hose & Fuel Filter
    GM1361713Courtesy of GENERAL MOTORS CORP.
  4. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to disconnect the following from the chassis bundle:
    • The chassis fuel return pipe (1)
    • The chassis fuel feed pipe (2)
    5. Fig 2: View Of Chassis Fuel Pipes & EVAP Pipe
    GM1361725Courtesy of GENERAL MOTORS CORP.
  5. Disengage the following from the retaining clips (3-5):
    • The fuel return pipe (1)
    • The fuel feed pipe (2)
    6. Fig 3: View Of Fuel Pipes & Retaining Clips
    GM1361726Courtesy of GENERAL MOTORS CORP.
  6. Remove the chassis pipes from the vehicle.
scientia non olet · About LEMON Manuals